Tesco's Recommendations Essay Example | Topics and Well Written Essays - 1000 words

Tesco's Recommendations - Essay Example However, it was with the oncoming of the 1990s that Tesco began its international expansion and began to channel extensive resources towards innovation in its marketing strategy to reach consumers (Clark, 2008). This paper shall attempt to shed light on Tescos current standing in the consumer market and the effectiveness of its current marketing strategies in order to develop a set of recommendations for Tesco to sustain and improve its market share and profitability. It is also imperative to realize that Tesco has chosen to exercise extensive product development and market development by adding products and services that are non-food but provide consumers with high levels of utility. This strategy is one that has proven to be extremely beneficial for Tesco over time (Chaffey, 2008). While this innovation on the part of Tesco may make it difficult to soundly place Tesco as a grocery retailer, the fact remains that Tescos fundamental sales items remain those that pertain to groceries. The approach is one that is found by Tesco in the concept of the investment in growth. Growth, according to Tescos strategy, is the development of availability and accessibility for consumers to Tesco (Corporate Watch UK, 2004). An example can be found in the fact that Tesco more than often chooses to make use of an opportunity to open an Express Store rather than letting it go by. With regard to the effectiveness of the current marketing and strategic outlook of Tesco, it can be observed that Tesco is currently recognized as a reliable and acknowledged brand amongst European consumers and is in a condition that can be considered stable enough to bring forth an expansion plan into the market (Corporate Watch UK, 2004). It would be appropriate for Tesco to move forth from market penetration approaches to product development strategies (Marivic Butod, 2009). Needless to say, the question of the

PhD Essay Example | Topics and Well Written Essays - 3750 words

PhD - Essay Example ..51 7 3.34.REFERENCES †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..53 7 3.48.CHAPTER 2 8 3.49.2.1 Fuel Economy 9 3.50.The fuel economy(FE) of any vehicle can be calculated as a ratio of distance travelled per unit volume of fuel consumed or as the ratio of fuel consumption per distance travelled (GFEI,n.d.). An et al (2011, p4) note that fuel economy standards can be of various forms such as liters of fuel consumed per hundred kilometers of distance travelled or kilometers travelled per liter of vehicle fuel. The global average vehicle fuel consumption hovers around 8L/100 km corresponding to 29.4 mpg and a global drive under the aegis of GFEI, whose partner organizations are the UNEP, IEA, ITF , ITCC and the FIA Foundation has been launched to bring it down to 4L/100km corresponding to 58.8 mpg by 2050 (GFEI,n.d.).The regulations pertaining to fuel economy followed by the four largest automobile markets, namely, the US, the EU, Japan and China differ significantly from each other (An et al, 2011, p4). 10 3.51.The fFactors affecting fuel economy of a vehicle 11 4.Power for consumption by accessories such as air conditioners and heaters is obtained from fuel consumption. The electric power required for operating an air conditioner in a vehicle can be split up into two components, namely, as the power for the compressor and the power for fans. It was found that there was an average increase in power consumption of around 27% in cars with air conditioners running at full power as compared to cars with air conditioners switched off OECD(2004,p124-125).The additional weight of the air-conditioning system by itself results in more fuel consumption due to extra energy required to beat the inertia of the system during acceleration and in turn increases the tailpipe emissions. Auxiliary heaters also contribute to increased fuel consumption and emissions . The ongoing technological developmental work for fuel economy carried out in vehicle air conditioners include reduction in component weight, improvement in compressor efficiency by adopting variable displacement or engine speed independent propulsion, intelligent control accuracy to increase temperature control accuracy, heat pumps, absorption systems, thermal storage, use of refrigerants with lower Global Warming Potential(GWP) with non-conventional system configuration and secondary loop systems(OECD,2004,p126-127).The power requirement of electrical equipment in a modern car is around 1kW and could go up to 12kW in the near future. Table 2.2 (Pundir ,2008,p20) gives the power consumption of accessories in a typical European car.The voltages of the auxiliary electrical systems being developed in vehicles are expected to be changed to around 42V.Since the advanced range of on-board equipment in cars would comprise of computer controlled systems, mobile internet, fax, GPS,TV and v ideo systems which need enhanced power input, highly efficient engines are required to be eq1uipped with alternator or Auxiliary Power Unit (APU) to supply the power(OECD,2004,127). 22 5. 25 6.Table 2.2 the power consumption of accessories in a typical European car ( Pundir,2008,p20) 26 9.1.2.2 Importance of fuel economy 26 9.2. 36 9.3.Table 2.3 fuel economy technologies for automobiles and light trucks ( NRC ,1992,p41) 36 9.5.2.2.1 Design and technology for fuel economy 36 9.6.Pundir(2008,p16-17) lists out the

The Road, Cormac Mccarthy Essay Example for Free

The Road, Cormac Mccarthy Essay The Road by Cormac McCarthy Rotted corpses. Landscapes devastated by fire. Abandoned towns and houses. In the post-apocalyptical novel, The Road, Cormac McCarthy explores the perseverance of a man and his son to survive in an obliterated world. He demonstrates that in spite of devastating conditions and dismal surroundings, goodness prevails over evil and an inherent goodness is present in humanity and the â€Å"good guy† no matter how dire the circumstances. Most importantly, the goodness portrayed, comes out of love. The man and the boy in this story are never named because the represent general humanity. If people , humans are provided with a reason to do the right thing, love, children, family, they will do whatever it takes. A parent will do completely unreasonable things to help, save their children out of love. He really doesn’t care what he has to do to keep his son alive – he would (and in fact did) murder a man for posing a threat to his son’s life. In page 76 of the book, the father tells the boy: â€Å"You wanted to know what the bad guys looked like. Now you know. It may happen again. My job is to take care of you. I was appointed to do that by God. I will kill anyone who touches you. Do you understand? † The lives of the man and the boy truly are worst-case scenarios. How many times have we wondered at one point or another in our lives if we’d be willing to take a bullet to the head or kill someone for our families’ or loved ones’ sake? These characters have been placed in that exact situation. They live in a post-apocalyptic world where human beings have been stripped to their core and have been driven to extremes by their innate need to survive, and they are no exception. The father is carrying out all those â€Å"what ifs† – he is doing what he must to keep his son safe. Truly, the only thing that keeps them going is their love for one another. â€Å"A symbol of the goodness in human perseverance and hope is the fire that the father assures his son they carry. As a good guy, the man and the boy carry the fire internally, meaning that they strive to live under all circumstances. † â€Å"The man does not consider acting violently in defense of his sons survival evil. Yet, what makes this choice more praiseworthy than the choices of the people who kill and even cannibalize others in order to survive? † Truck event: The difference between the father’s actions and the actions of the other people mentioned is that the father committed murder to preserve his son’s life, something he holds dear. This is a just cause. However, the violent acts committed by the aforementioned people were generally for self gain. Violence begets violence e. g. canibbals continue their blood thirsty ventures vs the dads violence restores peace and ends the violence. Son is a symbol of goodness, father sees him as christ figure†¦. the boy cannot agree with his father that the right thing to do is to refuse to help others who are in dire need, especially when they have not shown any evidence of being dangerous. Son sees dad as selfish (e. g. alues his sons life) while son himself is selfless†¦ the father does not trust any other individual they see or meet. Only his son extends his humbling trust in others, offering to help Ely and the thief without first determining whether their intentions are malicious. the boy does not understand the need to hurt others in any circumstances, even when they may pose a danger to his own survival or have already hurt him. For example, the boy pleads for his father to spare the thief and, even more, to help him. End Event Father Dies: Thesis:

History Of The Work Breakdown Structure Information Technology Essay

History Of The Work Breakdown Structure Information Technology Essay Projects developed with available time and budget are more useful for own as well as customers satisfaction. This process is completed through the mechanisms of planning, monitoring and also re-planning. This report supports the project scheduling, planning and analysis methodologies, modeling concepts and analysis technique. The report is presented using a theoretical contribution on process simulation to assist design planning. We have highlighted the design planning using Microsoft Project Design with key challenges of project management. The Microsoft Project is a flexible and competent program designed to administrate the projects and help to plan effectively. We can organize the lists of task and set the time frame and facilitates with quick planning of projects. Large and complex projects are more significant for the project management. The consequence decisions of projects as how the project is managed and role of the managers are portrayed. When the schedule is tight more need is magnified. Technical design of projects requires different skills and for the complex projects the technical aspects are out these areas which need to be well managed. For this reason project management is more emphasized backed by the specialized resources. The management team is responsible for the development, designing and delivery of the projects. Our project is based on the case study of the Pharmaceutical industrys Software development in Switzerland. Pharmaceutical industry management needed the software development for their indigenous business and in other countries of the world. It also addresses all the critical processes and operations which are required for its performance and successful business. The management system approaches to quality management and all the successful operations of Pharmaceutical industry. In this process the decommissioning of the business is considered to achieve the mandate and objectives. Work breakdown Structure Work breakdown structure (WBS) defines the total scope of our project. The WBS subdivides the project into smaller and manageable piece of work. This concept of the WBS is used to produce the work packages scheduled, cost estimated, monitored and controlled. The development team uses the WBS from the previous projects and works as a template for new project. The WBS involves the following activities Identifying the deliverable and other related work; Organizing and structuring the WBS; The decomposing of the upper work breakdown structure into lower level detailed components; Assigning and developing the identification codes to WBS. Finally verifying the degree of decomposition which is necessary and sufficient. Schedules Projects are complex endeavors and plan is a necessary guide for the execution of the project. The progress of the project is recorded on a project and remaining work is reassessed in the light of new information. It is rare that execution of a project proceeds as initially set plans. The purpose of the scheduling is to show a road map that when and how the project will deliver the products in the limits of the scope defined by the project team. For the project management planning and analysis the scheduling is one of the basic requirements. Its main aim is to set the time for the required project. The project management sets the time to complete the project. The management team engaged with our project manages the processes as given following. Many activities are performed by the management team accomplishing the project undertaken. Activity: To produce the deliverable projects many specific schedule activities are identified. Activity sequencing: The schedule activities are dependent and activity sequencing identifies these dependencies among the schedule activities. Activity resource estimating: This type of activity defines the resources to perform these schedule activities. Activity duration estimating: It identifies the number of work periods which are entirely needed to complete the individual schedule activity. Schedule Development: The process of analyzing the activity sequences, resources requirement, durations, and other schedule constraints required to create the project schedule. Schedule Control: It controls the changes made in project schedule. For our project we use the Microsoft Project 2010 where Gantt chart gives us visual representation. It represents the tasks and products deliverable within the time specified in schedule. It also provides the roadmap to execute the product its delivery, tracking the changes and also managing the changes. Microsoft Project Management has very powerful tools in it to perform the activities very quickly as in figure 1. Fig 1: Project professional 2010 We can manage the schedule tasking manually using the Project Professional 2010. Fig 2: Improved Top to down scheduling Managing team has option to schedule the task automatically as shown in figure 2. The design and developments tasks of our project are scheduled automatically. The project professional 2010 is more useful for the business managers and productivity of project. The concept of Precedence Diagramming Method (PMD) is used to represent the activities and show the dependencies of the activities with sign of arrows. There are four types of dependencies or called as precedence relationships. Finish-to-Start: Successor activity starts which depends upon the completion of predecessor activity. Finish-to-Finish: the completion of the successor activity depends upon the completion of predecessor activity. Start-to-Start: The successor activity starts and depends upon the completion of the predecessor activity. Start-to-Finish: The completion of the successor activity depends upon the beginning of the predecessor activities. Time constraints are very important during the schedule development. Start and Finish activities can be restricted by imposing the dates which affects the completion of the activities. Many other constraints are also present in the project management software but in our case Start No earlier than and theFinish no later than constraints are specifically used. Project customer, sponsor and stakeholders dictate the major milestones and affect the certain deliverable components to a specific date. The scheduled dates become the expected dates and only can be changed through the approval. Milestones only provide the schedules interface and are not part of the project data base. Fig 3: Milestone and Tasks Project is actually a list of tasks and manager reports and keeps track of it. Our project is broken into phases by the managers and completion of these tasks is called as milestone. Milestone of our projects are documented at the end of each phase which reduces the project operating cost. Planning and Control The planning process consists of the project maturity, scope, development and project management plan and schedule of project activities occurring within project. While control techniques are used to compare the actual performance with planned performance. It also analyses the variances and trend assessment to improve the process improvements and recommending the adequate corrective actions required. Monitoring and Controlling a Project When a project is planned then it requires to be started according to plan. Formal changes in plan are permitted and customers are informed about this change. If this process is not completed then it is not possible to get the approval for the extension of time. In our case the monitoring project ensures: development of the required products is ensured The required standard and quality are being met Products are ready in time according to the budget and planned resources Business case is achieved by the project products Using the planning and scheduling software three components are measured as Time, Resources and cost Planning Time Resources Cost The analysis of the project schedule is not taken lightly. Budget and timeline are the basic measures to analyze the quality of schedule. The budget and timeline are kept on track, if it is not on track then manager takes immediate action to cure the problem. For the project schedule a baseline was established, this baseline is used as starting point and performance on the project is also measured. This technique is used during the project execution when the project is on track. Cost Performance Baseline costs compared and variances are shown between these two variances. Earned Value Management (EVM) technique is used to monitor the IT projects in some ways as other projects. For the effective performance measurement EVM has proven itself and also feedback tool to manage the projects.EVM also informs us that where the project is and its comparison with the proposed project. Value of accumulated cost is also measured by the EVM as the amount of work and amount spent on it. PERT Analysis Project Evaluation and Review Technique (PERT) back to its history was used to control the large complex projects in USA. PERT has become now the combination of the Critical Path Method (CPM) and is thus know as the PERT/CPM. For project in discussion Pert Chart is a five step process. Identifying the all tasks for the entire project i.e. planning to execution of the product. Amount of work required to complete the each task in development of the product. Identifying the immediate predecessor tasks. Entering each task in PERT/CPM chart. Calculating the time and duration based on the resources and durations. In above tasks first two tasks are always manual and completed in brainstorming session. Last three tasks are interacted with MS Project. The best advantage of the PERT is used for the most probable effort for the tasks. We want to know the ways of estimating the effort for each task. Pessimistic, most likely and optimistic estimates are combined together into a single value which gives the expected effort for the task. A weight average simply ensures that any deviation from the optimistic or pessimistic estimates is not so much effective to take away the duration from expected duration. These estimated are more valuable when right people are involved in it. First task needed the two days and second one 1 day each with two people working. We can say that first task requires the 4 person-days of work and second task needed two. Three kinds of dependencies are found during the third task. These dependencies include the (1) project mandatory (2) external mandatory (3) discretionary. It is clear that start of the new task depends upon the success or output of previous task. External dependencies are due to non-project occurrences for example the arrival of the new hardware and interface definition of another project. Discretionary dependencies are troublesome. These dependencies are based on the flexibilities which are used to build the schedule; but also add some complexities. When all rearranging and juggling is completed and hand written information is transferred to computer based applications like MS project. Toggling between views optimistic pessimistic Calculating the Pert Entering the weight for PERT calculation Entering the durations of optimistic, pessimistic and expected in one sheet Entering the durations of optimistic, pessimistic and expected Figure 4: Pert Analysis in MS project We have found that PERT methodology has number of limitations. The first problem lies in calculating the accurate estimates of duration of tasks. When a single dominant path is selected then it yields very accurate results. In case when there are number of parallel paths then it gives overly optimistic estimation. It is recommended that classical PERT model for the quantitative for the risk analysis when you require the accurate estimation for the optimistic, pessimistic and most like durations and our project has a dominant path through the entire network. Conclusions In this report we have discussed the project scheduling, planning and analysis methodologies, modeling concepts and analysis technique using the Microsoft Project. Delivering the IT projects on time and budget is very critical to companies success and their effective management of scheduling. The concept of WBS is an essential part of this report which has determined the scope of our project. Activities and tasks with allocated time and budget are also discussed in this report. For these tasks and activities Gantt chart makes a best visual representation and used to manage and track the changes in schedule. Earned Value Management (EVM) is a best tool to measure the progress of the project. PERT analysis is also a major part of this report to represent the tasks and durations using the MS Project.

Dahmers Confession :: essays research papers

On Wed., 7-24-91, I, Det. KENNEDY on Squad 126, while interviewing the suspect in this offense, that being one Jeffrey L.. DAHMER, spoke to him in regards to the fact that he had knowledge to whether or not the acts he was comitting were right or wrong. At this time, Mr. DAHMER stated that he was fully aware that the acts he was colTiflitting were wrong and that he feels horrified that he was able to carry out such an offense. He stated that it is obvious that he realized that they were wrong because he went to great time and expense to try to cover up his crimes. He stated that he used quite a bit of caution by setting up alarm systems in his apartment, that being In the outer door, the sliding door leading to his hallway bathroom and bedroom, and his bedroom door. He stated that he set up a fake video camera and told other homosexuals that he had brought to his apartment that it automatically turned on if his door opened up without the alarm being turned off. He stated that this was all done in order to keep people from entering into his apartment and discovering the evidence of his criminal act. He also stated that he drank excessively to try to forget the nlghtmre he felt he was living as he remembered the horror of some of the acts that he performed. He stated that he is deeply remorseful now for what he had done and wished that he had never started. He stated that he is not sure why he started committing these offenses and feels that in order to make restitution to the families of those he has killed, that he would like to help the police In any way that he can by trying to identify his victims. Report dictated by Oct. Patrick KENNEDY. PK/rc 7-24-91 On Tuesday, 07-23-91, I, Detective KENNEDY, of Squad 126, while investigating the above incident and filing reports down on the 4th fi., of the CIB, was given a message, by the head jailer in LUCAD, that the suspect in this offense, one Jeffrey_DAHMER, had requested to speak with me again. At this time I proceeded to the 5th fl., LUCAD lock up, where I went to the cell, where DAHMER, the suspect was sitting. At this time I asked if he had in fact requested to see me again, and he stated "yes I did". Dahmers Confession :: essays research papers On Wed., 7-24-91, I, Det. KENNEDY on Squad 126, while interviewing the suspect in this offense, that being one Jeffrey L.. DAHMER, spoke to him in regards to the fact that he had knowledge to whether or not the acts he was comitting were right or wrong. At this time, Mr. DAHMER stated that he was fully aware that the acts he was colTiflitting were wrong and that he feels horrified that he was able to carry out such an offense. He stated that it is obvious that he realized that they were wrong because he went to great time and expense to try to cover up his crimes. He stated that he used quite a bit of caution by setting up alarm systems in his apartment, that being In the outer door, the sliding door leading to his hallway bathroom and bedroom, and his bedroom door. He stated that he set up a fake video camera and told other homosexuals that he had brought to his apartment that it automatically turned on if his door opened up without the alarm being turned off. He stated that this was all done in order to keep people from entering into his apartment and discovering the evidence of his criminal act. He also stated that he drank excessively to try to forget the nlghtmre he felt he was living as he remembered the horror of some of the acts that he performed. He stated that he is deeply remorseful now for what he had done and wished that he had never started. He stated that he is not sure why he started committing these offenses and feels that in order to make restitution to the families of those he has killed, that he would like to help the police In any way that he can by trying to identify his victims. Report dictated by Oct. Patrick KENNEDY. PK/rc 7-24-91 On Tuesday, 07-23-91, I, Detective KENNEDY, of Squad 126, while investigating the above incident and filing reports down on the 4th fi., of the CIB, was given a message, by the head jailer in LUCAD, that the suspect in this offense, one Jeffrey_DAHMER, had requested to speak with me again. At this time I proceeded to the 5th fl., LUCAD lock up, where I went to the cell, where DAHMER, the suspect was sitting. At this time I asked if he had in fact requested to see me again, and he stated "yes I did".

Essay --

Over the past century and a half, the spur of Bigfoots existence has questioned many researchers and non-believers alike. Extensive research and findings have sparked many to seek out if there is another creature amongst our woods. Bigfoots existence is limited to substantial evidence such as sightings, footprints, and somatogenic traces. Ben Radford the author of â€Å"Bigfoot at 50 Evaluating a Half-Century of Bigfoot Evidence† explains effectively of the possible existence through extensive evidence and theories whether the beast actually resides among us. The theory of there being an ape like beast that walks through our wilderness all started with a 16mm film in Bluff Creek, California by Roger Patterson and Bob Gimlin in 1967. The video displayed a tall, hairy human like figure trolling along a timber clearing walking briskly away from Patterson and Gimlin. The film ignited a craze amongst scientist and viewers to go on a conquest to prove Bigfoots existence. The 1967 film was never proven to be a hoax or real evidence and still today is a toss up. Personal sightings or eyewitness accounts make up what seems to be the most numerous amounts of evidence that’s been brought to attention. Sightings are not justifiable to whether â€Å" Squatch† is real no matter how many sightings are reported. The Pennsylvania Bigfoot Society stores archives of Bigfoot reports across Pennsylvania for almost the past century. Locally, in Erie County, there has suspected to be several eyewitness accounts of Bigfoot encounters. People often confuse a Sasquatch with a bear or some other unknown animal that they may seem to not make out clearly. â€Å" Eyewitness testimony is notoriously unreliable†(Radford 2002). Sure some people would not believe a person ... ... tested hairs and other parts for DNA and concluded that they fit into our family tree. â€Å" Those hair samples that could not be identified as known animal or human were subsequently screened using DNA testing, beginning with sequencing of mitochondrial DNA followed by sequencing nuclear DNA to determine where these individuals fit in the tree of life† (Ketchum 2013). The existence of Bigfoot isn’t quite certain to be real with the numerous accounts of acclaimed sighting and physical evidence that has been laid on the table for researchers to decipher. From my standpoint, Bigfoot is a cryptozoological creature that has yet to be explained that I’m not for certain about. Radford explained the facts whether the existence of Bigfoot is real or just a hoax. It’s just a matter of time when and where this mythological being will proven to be a new life form amongst us.

Philippines Cultural Assessment Essay

The primary language that business is conducted in the Philippines is English. This is a result of the American influenced era which began in 1898. One should not assume that just because English is the most commonly used language that both verbal and nonverbal forms of communication are conducted the same way that they are in America. The Philippines business environment is known to be highly personalized. The communication style of the Philippines has also been perceived as difficult to comprehend due to its diplomatic and complex language which is derived from its Asian roots. (http://www.worldbusinessculture.com/Filipino-Business-Communication-Style.html) It is common in the Philippines, as well as most Asian countries, for people to have an extremely difficult time saying ‘no’ because they tend to try to avoid hurting others feelings. Saying ‘no’ to someone can also be viewed by others as confrontational and unfriendly. Because of this Filipino’s would rather say ‘yes’ even if they mean ‘no.’ (http://www.worldbusinessculture.com/Filipino-Business-Communication-Style.html) Filipinos’ dialogue-oriented, rather emotional communication somewhat resembles Spanish, but is less forceful and exuberant. As a show of respect, Filipinos usually address people by their titles (e.g., Architect Cruz, Attorney Jose, Dr. Romero). Over time, and after a relationship is established, they may address business associate by their informal title or nickname. (http://www.telegraph.co.uk/news/uknews/4205562/National-Cultural-Profiles-Philippines.html) In the Filipino culture a pervasive smile can easily be interpreted as agreement or affirmation in what has just been discussed. That same smile can easily be used to hide embarrassment, aggravation on disagreement. Nonverbal signs of affirmation include the raising of an eyebrow and the jerking of the head upward. A common sign for â€Å"no† include the jerk of the head down. For example, if an individual says â€Å"yes† while pointing their head downward you can be fairly certain that they feel negatively about what you have been discussing. (http://www.telegraph.co.uk/news/uknews/4205562/National-Cultural-Profiles-Philippines.html) Although in most cultures it is common for both men and women to shake hands with one another when they are first introduced or when greeting each other, that is not the case in the Filipino culture. Any form of touching, especially men touching women is frowned upon by Filipinos. (http://www.intercultures.ca/cil-cai/ci-ic-eng.asp?iso=ph#cn-2) The Philippines are split into three different regions called, â€Å"Luzon, Visayas, and Mindanao.† Gender roles in the Philippines are found in school systems, dating, marriage, and especially their families. When Filipino’s are born they assume their gender role by their sex. Males get more respect for the most part because females take after their mothers and elder women to take less dominating roles, also being more feminine in the jobs they choose to hold. Men are categorized into the more dominating roles in society. Men are brought up to take after their fathers or the elder man in their life. They are defined as being more confident, accomplished, and well-rounded individuals. School systems are strict on students, making them look presentable, especially males. Males are required to have short hair and females must wear skirts down to their shins. Dressing inappropriately is not tolerated. Males and females got to the same school but they divide them into two separate parts of the school. Attending a college or university for the average person is highly unlikely because there is no financial aid available so only the wealthy go and receives the higher education. Education is very important to Filipinos and is stressed by their parents to have the best education possible to be successful. Format for names, the country being a predominant catholic, old folks follow the old traditional way of naming their children after the names of the saints. In Luzon, the largest island and where the capital sits, has a strong western influence, naming mostly patterned like the westerners. The country is patriarchal when it comes to family roles. The male or the fathers are always the head and of the household and the final word when it comes to domestic affair. There are regions, like in south Mindanao, the grand chief of the village is the eldest and the wealthiest of the clan where his power over other members of the clan is important even on domestic affairs. The female or the wife is expected to be the care taker of the household, including keeping up with the children. They do not have voicing power compared to the husband (Heinrich 2008) Dating among the Filipino’s is not usually done unless they are eighteen years old because education is most important. Even then when they start dating the male will pay for the female.